- (631) 468-8116
- 1545 Ocean Ave A2 Bohemia, NY 11716
Gunsmithing
All Gunsmithing services are available. Please email prior to dropping off. Please include a description and pictures of any work that you’d like done if possible.
BASIC GUNSMITHING CHARGES
| MINIMUM BENCH CHARGE, LONG GUNS. | $110.00 |
| MIMIUM BENCH CHARGE, HANDGUNS. | $125.00 |
| HANDGUN COMPLETE DISASSEMBLY & REASSEMBLY | $125.00 STARTING |
| LONG GUN COMPLETE DISASSEMBLY & REASSEMBLY | $125.00 STARTING |
| LABOR, PER HOUR | $195.00 |
| PIN & WELD | $150.00 STARTING |
DRILL & TAP
| DRILL & TAP, PER HOLE. | $75.00 THROUGH MIN $105.00 BLIND MIN |
| MIL SUP HOLES. |
$125.00 EACH STARTING PLUS TOOLING. |
CLEANING
| BASIC CLEANING, FIELD STRIP. | $105.00 MIN |
| DETAIL CLEANING. | $135.00 MIN, + DISASSEMBLY COSTS |
CHECK HEADSPACE
| HEADSPACE GO/NO GO, COMMON CARTRIDGES (MOST GUNS). | $95.00 |
| HEADSPACE .001" INCREMENT FOR 308WIN, 5.56MM, 223REM, (MOST GUNS). | $105.00 |
| HEADSPACE FOR ODD, OBSOLETE CARTRIDGE. | $119.00 STARTING |
MAJOR REPAIR WORK
| BASIC SCREW REMOVAL. | $100.00 STARTING |
| REMOVE SHEARED SCREW. | $150.00 STARTING |
| Removed sheared screw via helical milling |
$195.00 STARTING |
| Remove sheared shotgun magazine tube that is threaded in place |
$240.00 STARTING |
| EDM DRILL AND OR EDM SINKER REMOVAL OF SEIZED PINS, SCREWS, & TAPPER PINS. | $450.00 STARTING |
| REMOVAL OF ITEMS STUCK IN BORE. | $190.00 STARTING |
| REMOVAL OF LIVE ROUND. CALL FIRST!!! | $350.00 STARTING |
BOLT ACTION RIFLE WORK
| Bolt fluting: Remington 700 Long or Short Action, helical or straight, 6 flutes. |
$135.00 |
| CERAKOTE BOLT AFTER FLUTING |
$65.00 GRAPHITE BLACK $75.00 OTHER COLORS FIRING PIN SHOURD ADDITIONAL $25.00 |
| Thread muzzle for non-directional brake, recommended muzzle device supplied at time of install. |
$150.00 |
| Thread muzzle and provide custom made thread protector. |
$195.00 |
| Time and install muzzle brake, most brakes. |
$175.00 STARTING |
| Thread 700 bolt for oversized knob (customer supplied knob). |
$85.00 |
| Thread and chamber barrel for Rem 700, Winchester 70 push feed, or Howa 1500 (customer supplied premium barrel). |
$450.00 L.A CARTRIDGES ADDITIONAL $30.00 |
| Thread and chamber barrel for Tikka T3/ T3X, turn down shank. |
$475.00 L.A CARTRIDGES ADDITIONAL $30.00 |
| Thread and chamber barrel for Savage 10/110, headspace off shoulder, removes barrel nut system and allows heavier contour barrels to be used for great accuracy (customer supplied premium barrel) |
$450.00 L.A CARTRIDGES ADDITIONAL $30.00 |
| USMC spec lug slot for M40A3/A5 Optical mounting platform will milled rear bridge. |
$325.00 |
| Convert Rem 700 to 8-40 screw. |
$155.00 |
| Supply and install side bolt release on Rem 700. |
$155.00 |
| True (blueprint) M700 action- includes chasing receiver threads, true receiver lug abatements, true bolt lugs and bolt face. Does not include timing bolt handle if needed. |
$195.00 |
| Bed MAGPUL Hunter 700 stock. |
$145.00 |
| Bed HS Precision stock. |
$250.00 |
| Bed McMillan or Manners stock with aluminum pillars and Marine-tex. |
$350.00 |
| Cut and crown barrel with M40A3/A5 style crown. |
$125.00 |
| Vais muzzle brake supplied and installed. |
$295.00 STARTING |
| Timney trigger installed if gun apart. |
$50.00 STARTING |
| Mount optic: Install rings and bases, boresight optic. |
$75.00 STARTING |
| Disassemble or assemble bolt rifle before or after machine work. |
$100.00 STARTING |
| Rebarrel rifle other than Rem 700. |
PLEASE EMAIL |
| Build spec M40A3 on customer supplied parts. |
PLEASE EMAIL |
| Build spec M40A5 on customer supplied parts. |
PLEASE EMAIL |
| Build complete custom rifle with customer supplied parts. |
PLEASE EMAIL |
SHOTGUN WORK
| Install customer supplied Wilson Combat/Scattergun Tech ghost ring sights on bead barrel shotgun.
|
$125.00 |
| Install customer supplied Wilson Combat/Scattergun Tech ghost ring sights on rifle sight shotgun barrel. requires removal of front sight. |
$155.00 |
| Install customer supplied Vang Comp Ghost ring sights, include silver soldering front base in place. requires refinishing. |
$250.00 |
| Machine ports on Remington 870 barrel. |
$150.00 |
| Remove factory Remington rifle sight base, price per base. |
$65.00 |
| Machine barrel to accept Rem Choke tubes, PLUS COST OF CHOKE TUBE (REQUIRED). BARREL MUST NOT BE CHROME LINED. |
$135.00 THIN WALL CHOKES ADDITIONAL CHARGE TAC13 ADDITIONAL CHARGE. |
| Open fixed choke. |
$95.00 |
| Cut and crown plain shotgun barrel. |
$95.00 |
| Cut and crown vent rib shotgun barrel. |
$95.00 STARTING |
| Drill and tap to install shotgun bead. |
$75.00 STARTING |
REMINGTON 870 EXPRESS PERFORMANCE PACKAGES
870 EXPRESS BASIC- CUT AND CROWN VENT RIB BARREL TO 18.5", DRILL, TAP AND INSTALL FIBER OPTIC BEAD, INSTALL BAR STOCK EXTRACTOR, INSTALL OVERSIZED SAFETY. |
$250.00 |
| 870 Express Intermediate- Cut and crown vent rib barrel to ~18.5”, drill, tap and install fiber optic bead, install bar stock extractor, install oversized safety, and machine for interchangeable choke tubes. |
$295.00 |
| 870 Express Advanced- Cut and crown vent rib barrel to ~18.5”, drill, tap and install fiber optic bead, install bar stock extractor, install oversized safety, and machine for interchangeable choke tubes, machine out magazine dimples, supply and install 2-shot magazine extension. |
$355.00 |
BROWNING CITORI RELIABILITY PACKAGE
| Citori reliability package, clean internals and install Chrome Silicon Top Lever Spring, 2 Chrome Silicon Hammer Springs, 1 Bottom Barrel Firing Pin Return Spring, 1 Bottom Barrel Firing Pin, 1 Top Barrel Firing Pin and test fire. |
$355.00 |
1911 PISTOL WORK
| French border slide. |
$175.00 - $225.00 + |
| Flat top slide. |
$95.00 - $200.00 + |
| Machine golf ball or chain-link pattern and flat top slide. |
$175.00 - $250.00 + |
| Carry cuts on Commander or full sized pistol slide. |
$125.00 - $200.00 + |
| Ball end mill cuts on commander or full sized gun. |
$175.00 |
| Heavy machine chamfer bottom of slide. |
$150.00 - $175.00 |
| Machine dovetail for customer supplied front sight. |
$100.00 |
| Drill slide for 1/16″ roll pin for Novak style front sights. |
$45.00 |
| Machine slide for Novak style front and rear sights. |
$195.00 |
| Machine slide, supply and install Novak Lo Mount style 3 dot tritium front and rear sights. |
PLEASE EMAIL |
| Machine slide, supply and install Heine Slant Pro front and rear sights, black, starting at. |
PLEASE EMAIL |
| Machine slide, supply and install Heine tritium front and rear sights. |
PLEASE EMAIL |
| Lower ejection port. |
$150.00 |
| Fit slide to oversized frame. |
$225.00 |
| Undercut trigger guard. |
$100.00 |
| Golf ball front strap. |
$325.00 STARTING |
| Chain-link front strap. |
$325.00 STARTING |
| Install new plunger tube. |
$70.00 |
| Dehorn pistol. |
$150.00 |
| Furnish, install and contour premium grip safety. |
$295.00 |
| Blend rear of slide and frame. |
$50.00 |
| Fit and blend customer supplied MSH. |
$105.00 |
| Fit and blend customer supplied MSH, texture with golf ball or chain-link pattern. |
$170.00 |
AR180 MAGAZINE CONVERSION
Convert customer supplied AR-15/M16 magazines to work with Armalite AR180
| For machine work only. Add $50 plus return shipping to test fit magazines to your rifle. Recommend customer sends good quality magazines, magazines with weak welds will not withstand pressure of vise when machined. |
$45.00 A MAGAZINE FOR 1-4 MAGAZINES. $30.00 A MAGAZINE FOR 5-10 MAGAZINES $25.00 A MAGAZINE FOR 11+ MAGAZINES. |
CERAKOTE IS BACK AT 782
| MINIMUM LOT CHARGE | $250.00 |
| CONSUMABLES | $25.00 |
CERAKOTE LEAD TIME IS 60-90 DAYS.
WE DO NOT CERAKOTE PLASTIC, FIBERGLASS, OR OPTICS.
ALL PRICING ARE FOR DISASSEMBLED FIREARMS. ADDITIONAL FEES ARE ADDED TO DISASSEMBLE AND REASSEMBLE FIREARMS.
DIRTY/RUSTY FIREARMS WILL BE CHARGED TO DISASSEMBLE AND REASSEMBLE AND CLEAN PRIOR TO CERAKOTE.
TO OUR NYS CUSTOMERS:
WE CAN COAT THE SAME COLOR THE FIREARM IS OR A COLOR INTENDED FOR HUNTING PURSUANT TO NYS LAW.
{20. "Disguised gun" means any weapon or device capable of being concealed on the person from which a shot can be discharged through the energy of an explosive and is designed and intended to appear to be either; (a) something other than a gun; or (b) a toy gun that shall include, but not be limited to, any firearm, rifle, shotgun or machine-gun displaying a color finish other than the original manufacture color, a decorative pattern or plastic like surface; provided, however, that any rifle or shotgun displaying a camouflage color finish or pattern that is intended for hunting, as defined by article eleven of the environmental conservation law, shall not be considered a "disguised gun" for purposes of this section.}
ALL GUNSMITHING SERVICES ARE AVAILABLE.
IF YOU DON’T SEE IT ON THE LIST, JUST ASK!
PLEASE EMAIL PRIOR TO DROPPING OFF. PLEASE INCLUDE A DESCRIPTION AND PICTURES OF ANY WORK THAT YOU’D LIKE DONE IF POSSIBLE.
CURRENT LEAD TIME FOR SIMPLE WORK SUCH AS PC9 THREAD REMOVAL IS APPROXIMATELY 3 WEEKS.
MORE COMPLEX MACHINE WORK IS 6 WEEKS MINIMUM.
COMPLETE RIFLE BUILDS, COMPLEX MACHINE WORK, RESTORATION OR REPAIRS THAT REQUIRE PARTS FROM OUTSIDE VENDORS, ARE AVERAGING AT LEAST 12 WEEKS.
REPAIRS THAT REQUIRE OUTSOURCED PARTS CAN BE LONGER DUE TO DISRUPTIONS IN THE SUPPLY CHAIN.
THANK YOU FOR YOUR PATIENCE AND UNDERSTANDING
WHAT DO I NEED TO KNOW ABOUT YOUR GUNSMITHING POLICIES?
- Our minimum bench charge for long guns is $110 and for handguns is $125.
- The bench charge will be paid when the firearm is dropped off.
- If the work requires an estimate, the estimate will be e-mailed to you prior to the next phase of work.
- Machine work is prepaid at the time the firearm is dropped off.
- You will be notified when your work is complete.
- Completed work left over 30 days will incur a $5/day storage fee.
- All gunsmithing prices are discounted cash pricing. Credit card payments lose 3% cash discount.
Gallery
DID WE DO WORK FOR YOU? WANT TO SHOW IT OFF?
SEND A PHOTO AND WILL POST IT!
© 2024 782 Custom Gunworks LTD - All rights reserved
